• Automatic tool on/off start feature turns the Vacuum on/off when a connected power tool is switched on/off. In “Auto Start” mode, the Vacuum continues to run for five seconds to clear the hose after tool is turned off. Also has a “Manual” operation mode.

• Electronic variable suction control (not available on Turbo 2 FCS) reduces noise to an average of 60 decibels, and is beneficial for controlling suction on sensitive sanding jobs. Adjustable through five levels with an LED indicator.

• Two-stage bypass motor has a sealed fan for dust and debris suction, and a second fan to blow cooling air across the motor.

• Extremely powerful with a static water lift rating of 90" and 116 cfm air flow for Turbo 1 and 2, and 99" and 126 cfm for Turbo 3.

• Soft start motor helps prevent tripping circuit breakers.

• Hoses (11/4" and 21/4") swivel at both ends, are crushproof and interchangeable between all Vacuums. The 11/4" hose locks into the Vacuum, while the 21/4" hose connects with a friction fit.

• Float regulator allows use for wet operation. All (except Turbo 1) have a liquid drain valve.

• Six swivel casters for easy mobility and maximum stability.

• Operate on 120V power through a 16' 14/3 wire cord with a molded plug and are CSA/UL listed.

• Supplied with a hose, No. 9-21-069-AK13 Connector Tube Adapter (11/4"), filter (see table below), and operating instructions. Turbo 1 includes one each Nos. 9-19-001-A13 21/2" Round Brush and 9-19-007-K13 Crevice Nozzle (11/4"). Turbo 3 includes one each No. 9-21-005-AK13 11/4" – 21/4" Adapter.

• Three year warranty.

The three HEPA Vacuums are supplied with a dust bag and a 0.3 micron cartridge filter designed to meet the industry standard for collecting 99.97% of particulate 0.3 microns or larger. Use of a HEPA Vacuum not only gives the best performance for ordinary dust collection, but is also necessary for compliance with the EPA RRP (Renovation, Repair and Painting) rule for work procedures when disturbing areas with lead-based paint.

Table of Vacuum Descriptions