Has precision located slots for accurate 45° and 90° cuts, and 3/16" thick case hardened sidewalls maintain this accuracy. The 3/4" thick soft base prevents blade dulling. Has three threaded holes in one sidewall to lock moulding in place with thumb screws. One sidewall is flush with the bottom …

The 3-1/4" inside width makes this the widest floor covering miter box on the market. It accommodates all sizes of floor covering metal trims. This box has a 2-1/4" inside height with a 3/4" thick hardwood base to give 3" high x 10-1/2" long overall dimensions. Has five hacksaw slots …

Small, but highly practical for floor covering metal mouldings. Conveniently fits in a tool box, and weighs only 3 lbs. The 1/4" thick steel sidewalls are case hardened to resist wear and maintain accuracy. Stands level for freehand use anywhere on the job. The hardwood base is notched at both …

The Vinyl Miter tool makes straight or 45° angle cuts on vinyl and wood mouldings. It uses an easily replaceable 2-3/8" long razor sharp blade. Features a 4 to 1 leverage, nickel plated steel parts and comfortable vinyl grips. The handle locks in the closed position for safety. Supplied with …

Save time and money with these precision tools that are perfect for use in the shop or on the job. Material is easily cut with one squeeze of the hand. The die sets are easily and quickly interchanged in the handle. The assembled unit weighs only 2 lbs. and is …

This tool includes the No. M50 Handle and a die set to cut a special 90° V-shaped notch 1/4" wide flush to the inside face of the moulding. This type of cut prevents ‘blousing’ of the moulding when wrapping small radii and sharp corners. Makes the neatest, smoothest and most …

This is Crain Item No. 846. For all simple mitering, notching and trimming. Full thickness punch gives maximum protection against breakage when cutting heavier gauges of metal. Die set is made from heat treated alloy tool steel. Throat depth is 1". No. M50 Handle is sold separately.

This is Crain Item No. 848. For 3/32" and larger cap strip as the front tip of the full thickness punch has been cut away to allow general mitering of channel and cap strip moldings. Each leg of channel type moldings is cut separately. Die set is made from heat …

This is Crain Item No. 850. Used for 1/16" cap strip only as the punch is made from thinner material, letting it enter narrower channels such as used on plastic laminate installations. Should only be used on 18 gauge (.049"), or lighter, aluminum as other materials will cause tip breakage. …