Undercuts door jambs and other wall base obstacles. Eliminates intricate fitting work. Specially shaped 12" long blade permits right or left hand cutting. The comfortable wood handle is sufficiently offset to provide knuckle protection. Supplied with a small knob for optional use (in place of the front wing nut) for …
This 36-tooth, 5-5/8" diameter Carbide Tipped Steel Blade is bell shaped for flush cutting wood and added rigidity. For use with the No. 575 Multi-Undercut Saw as well as retired saw models Nos. 545 and 555. Caution: As these blades are subject to possible abuse, they are not guaranteed. …
This saw undercuts walls, door jambs, toe spaces and will also fully undercut inside corners up to 1/4" deep. The height of cut is easily adjustable from flush to 1" above the floor in 3/32" increments. The large flat base helps prevent tipping and assures accurate, level cutting. Has …
The extended spindle, low-profile cutting head, and flush-mounted blade of this saw allow it to cut all the way against the inner wall of a toe-kick for removing old underlayment. The hinged depth adjustment plate has five settings for common underlayment thicknesses including 1/4", 3/8", 1/2", 5/8", or 3/4". Also …
This Carbide Tipped blade has 18 teeth and is 3-3/8" in diameter. Depth of cut is 3/4". This blade is compatible with all versions of the Crain Toe-Kick Saw. Caution: As these blades are subject to possible abuse, they are not guaranteed. Blades are not recommended …
For use with the older version No. 795 Toe-Kick Saw only. This Carbide Tipped blade has 16 teeth and is 2-3/4" in diameter. Depth of cut is 3/8" Caution: As these blades are subject to possible abuse, they are not guaranteed. Blades are not recommended for …
This Segmented Diamond Rim blade is 2-7/8" in diameter and has a 1/2" depth of cut. This blade is compatible with all versions of the Crain Toe-Kick Saw.. Caution: As these blades are subject to possible abuse, they are not guaranteed. Blades are not recommended for …
This 6-1/2" Combination steel blade has more teeth for smooth cuts. Caution: As these blades are subject to possible abuse, they are not guaranteed. Blades are not recommended for cutting metal as sparks can cause a fire hazard.
Blades are available in combination steel, carbide tipped steel and masonry cutting types. Combination steel blades have more teeth for smooth cuts, while carbide tipped blades have longer life. Blades for the Nos. 800 and 810 Super Saws are not interchangeable with blades for the No. 550 Saw, and vice …
This 6-1/2" diameter blade is for dry undercutting masonry. Use with the No. 820 Heavy Duty Undercut Saw and the No. 812 Super Saw or the Discontinued Nos. 800, 800V, 810, and 810V Super Saws. Caution: As these blades are subject to possible abuse, they are not …
This 6-1/2" diameter blade is for undercutting wood. Carbide tipped for long life. Use with No. 812 Super Saw or No. 820 Heavy Duty Undercut Saw. Caution: As these blades are subject to possible abuse, they are not guaranteed. Blades are not recommended for cutting …
This 6-1/2" diameter blade is for dry undercutting tile, stone, concrete and brick. Use with Nos. 812 Super Cut Saw, No. 820 Heavy Duty Undercut Saw or the No. 825 Heavy Duty Undercut Saw . Caution: As these blades are subject to possible abuse, they are not …
This powerful saw undercuts walls, door jambs, doors, inside corners and most toe spaces. The 61/2" diameter No. 836 Carbide Tipped Steel Blade can fully undercut most doors in place and when used with the No. 805 Masonry Blade, can also be used for undercutting hearths. Height of cut is …
This new 6-1/2" diameter blade is for undercutting wood and provides improved flatness and greater cutting efficiency. Has 40 each Carbide Tipped Teeth for long life. For use only with No. 835 Heavy Duty Undercut Saw. Caution: As these blades are subject to possible abuse, they are not guaranteed. …